Antar, Son of Rheor [Singleplayer Campaign Feedback Thread]

Discussion and development of scenarios and campaigns for the game.

Moderators: Developers, Forum Moderators

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby pinku » December 30th, 2012, 10:17 am

Bug Report:

I cannot win the first scenario, "Attack Of The Undead": after killing all the undead and Malbeth
the "Master I have failed" dialog appears the wounded Yeres arrives but then nothing happens,
only the error message appears:
<Invalid WML found> Could not find a suitable hex near to one of the target hexes in [move_unit].
and then if I continue the only way to exit the scenario is through turns running out and I loose.

BfW version 1.11.0
difficulty: UNTLB
Last edited by pinku on December 31st, 2012, 1:09 am, edited 1 time in total.
pinku
 
Posts: 4
Joined: December 30th, 2012, 10:06 am

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby Adamant14 » December 30th, 2012, 6:06 pm

I am sorry for that.
The bug is caused most likely because you positioned Lord Antar somehow "unlucky". :hmm:
In the victory event Yeres appears on the edge of the map, then I used a piece of code to move him near to Lord Antar.
But because that was to simple I wanted Yeres to end his move on a road hex. :P
Seems there was no such hex vacant, near of Lord Antar. :(
This never happened to me in all my test plays.
really strange that this never happened to me before. I played this scenario over and over. :hmm:

Thank you for the report, and thank you for the very precise description of the bug. :)
Can you please post a replay? Or a screenshot?
Or tell me where Antar was on the map when the bug happens?
It would help me to fix this bug. :)

To continue the game I suggest to kill Baron Malbeth again, but with Lord Antar on a different position.
And I will change the code, to avoid this case can happen again.
Will be fixed with the next update.

Thanks for playing. :)

EDIT:
Modified the code. Available with the next upload.
Thanks again for the report.
But I am still curious how the units where placed at the end of the scenario.
A screenshot, or a replay would be really great. :)
Author of Antar, Son of Rheor: SP Campaign


Please add your (or some other) campaign to this sites: Guide to UMC Campaigns | Players' Review(s) | Please leave a comment here: WML filtering , WML variables
User avatar
Adamant14
Forum Regular
 
Posts: 711
Joined: April 24th, 2010, 1:14 pm

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby pinku » December 31st, 2012, 1:09 am

I've just sent you a replay in a pm.

In the meantime, here is what I did:
upgraded BfW 1.11.0 -> 1.11.1

removed Antar add-on, and then reinstalled it again (version 0.9.2b)

but now I cannot even start it. when it loads for the first time
it says it could not load _main.cfg:
Found invalid closing tag [/story] for tag [part] (opened at ~add-ons/Antar/utils/story.cfg:5),
value ']' in ~add-ons/Antar/utils/story.cfg:48

and then it claims there's no "Attack_Of_The_Undead" scenario.

Do you think I messed things up totally ? Should have not been upgrading to 1.11.1 ?

Thanks!
pinku
 
Posts: 4
Joined: December 30th, 2012, 10:06 am

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby Adamant14 » December 31st, 2012, 10:26 am

pinku wrote:Do you think I messed things up totally ? Should have not been upgrading to 1.11.1 ?
It is completely my fault. :oops:
I am really sorry for all that trouble.

I found and fixed the bug.
The new version is available on the server, so please update.

The latest version is 0.9.3

Thank you for your precise bug reports. :)
And thank you for giving the campaign a second chance. :)
Author of Antar, Son of Rheor: SP Campaign


Please add your (or some other) campaign to this sites: Guide to UMC Campaigns | Players' Review(s) | Please leave a comment here: WML filtering , WML variables
User avatar
Adamant14
Forum Regular
 
Posts: 711
Joined: April 24th, 2010, 1:14 pm

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby pinku » December 31st, 2012, 12:46 pm

Thanks, it loads fine now (0.9.3 with 1.11.1). For what it's worth, I'm on a Mac OS X.

The missing tile problem persists, however (and prevents me from moving to the next scenario :(
Last edited by pinku on January 1st, 2013, 11:53 pm, edited 1 time in total.
pinku
 
Posts: 4
Joined: December 30th, 2012, 10:06 am

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby Adamant14 » December 31st, 2012, 1:18 pm

:doh: :augh:
I'm using Windos 7, and it works like a charm here.
I'm too sorry but I can't help you (right now). :(

Maybe some other Mac user has an idea.
And I have no Idea if this bug happens to all Mac users, or just to you.
I really wished more people would report bugs.
I start a topic to find it out.
Hope I get some helpful answers.

EDIT: I deleted the topic, because I think the problem is solved. :)
Last edited by Adamant14 on December 31st, 2012, 2:49 pm, edited 1 time in total.
Author of Antar, Son of Rheor: SP Campaign


Please add your (or some other) campaign to this sites: Guide to UMC Campaigns | Players' Review(s) | Please leave a comment here: WML filtering , WML variables
User avatar
Adamant14
Forum Regular
 
Posts: 711
Joined: April 24th, 2010, 1:14 pm

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby Crendgrim » December 31st, 2012, 2:14 pm

Just to make sure: Did you replay the scenario, or did you use a save file?
If you used an old save, the bug might still persist.
UMC Story Images — Story images for your campaign!
User avatar
Crendgrim
Moderator
 
Posts: 1316
Joined: October 15th, 2010, 10:39 am
Location: Germany

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby Adamant14 » December 31st, 2012, 2:27 pm

Very good point.
Thank you Crendgrim. :)

@pinku:

Did you used a save-load?
If yes, then try to start the whole scenario new.
And please report what happens.
Thank you. :)
Author of Antar, Son of Rheor: SP Campaign


Please add your (or some other) campaign to this sites: Guide to UMC Campaigns | Players' Review(s) | Please leave a comment here: WML filtering , WML variables
User avatar
Adamant14
Forum Regular
 
Posts: 711
Joined: April 24th, 2010, 1:14 pm

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby pinku » December 31st, 2012, 2:39 pm

Indeed. When I played this anew, I could finish with no problem (and indeed attempted to finish it from a save file before).
Thanks for all the help :)
pinku
 
Posts: 4
Joined: December 30th, 2012, 10:06 am

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby Adamant14 » December 31st, 2012, 2:46 pm

This means my campaign runs without problems on Mac.
That's great. :)

Hope you enjoy the rest of the campaign.
And hope also let me know if there are further problems. :)
Author of Antar, Son of Rheor: SP Campaign


Please add your (or some other) campaign to this sites: Guide to UMC Campaigns | Players' Review(s) | Please leave a comment here: WML filtering , WML variables
User avatar
Adamant14
Forum Regular
 
Posts: 711
Joined: April 24th, 2010, 1:14 pm

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby Gitanomad_X » January 8th, 2013, 4:53 pm

Hi, Antar is one of my favorite campaigns which I've replayed several times, and await the final scenarios with much anticipation.

I've encountered a bug in the "Revenge" scenario on Mac OSX 10.8.2, Wesnoth 11.1, Antar 0.9.3. The recall list is empty and I can only recruit new units. My internet is extremely slow lately, but I can upload save files upon request.

Thank you!
Gitanomad_X
 
Posts: 8
Joined: March 30th, 2011, 4:55 pm

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby Adamant14 » January 8th, 2013, 7:53 pm

Gitanomad_X wrote:Hi, Antar is one of my favorite campaigns which I've replayed several times, and await the final scenarios with much anticipation.
Thank you :)

Gitanomad_X wrote:I've encountered a bug in the "Revenge" scenario on Mac OSX 10.8.2, Wesnoth 11.1, Antar 0.9.3. The recall list is empty and I can only recruit new units.
I can reproduce this bug.
For me it seems that this is some kind of BfW version 1.11.1 problem.
A related thread

Thank you for reporting this problem.
Author of Antar, Son of Rheor: SP Campaign


Please add your (or some other) campaign to this sites: Guide to UMC Campaigns | Players' Review(s) | Please leave a comment here: WML filtering , WML variables
User avatar
Adamant14
Forum Regular
 
Posts: 711
Joined: April 24th, 2010, 1:14 pm

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby Adamant14 » January 12th, 2013, 9:22 pm

The 1.11.1 problem isn't solved.
Maybe with the next BfW version.
But I added a workaround to make sure that Elorial Din keeps his recall list, his gained gold, and all his progress.
Thanks to the coders of 'Legend of Wesmere', you showed me how to do it. :)

'Antar, Son of Rheor' version 0.9.5 is available on the 1.11 server, so please update.
(BfW version 1.10 is not afflicted, so there is no update on the 1.10 server)


EDIT:

My campaign still doesn't work correct on BfW version 1.11.0 ! :(
On the stable 1.10 versions everything works fine,
but if you use the development version, then please use BfW version 1.11.1
Author of Antar, Son of Rheor: SP Campaign


Please add your (or some other) campaign to this sites: Guide to UMC Campaigns | Players' Review(s) | Please leave a comment here: WML filtering , WML variables
User avatar
Adamant14
Forum Regular
 
Posts: 711
Joined: April 24th, 2010, 1:14 pm

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby dark_Crag » January 13th, 2013, 10:43 pm

BfW version/Language:
1.11.1/Eng

Description:
Error "Invalid WML found: Descriptions should no longer include the name as the first line. (2)" is displayed

Reproduction scenario: (reproduced)
- right click on "Careonryn" and choose "unit description"
- close description
- left click on "Careonryn"
- error appears

Attachment
ASoR-Attack_Of_The_Undead-Auto-Save1.gz
Attachments
ASoR-Attack_Of_The_Undead-Auto-Save1.gz
(60.92 KiB) Downloaded 41 times
Currently playing: Legend of the Invincibles
Already finished on BfW 1.11.X: Heir to the Throne, A Tale of Two Brothers, Rebellion in the North
dark_Crag
 
Posts: 40
Joined: December 30th, 2012, 7:31 pm
Location: Czech Republic

Re: Antar, Son of Rheor [Singleplayer Campaign Feedback Thr

Postby Adamant14 » January 14th, 2013, 4:05 pm

Thank you for the detailed report.
I tried many times to reproduce the error, but the error did not appear.
I tried different versions of my campaign, no such error message. :hmm:

Did the error appear more than one time, or did you quit after the first try?
Can you please try again an tell me what happens?
The autosave that you attached shows no error, you better post a replay.
Thank you, and sorry for the trouble.
Author of Antar, Son of Rheor: SP Campaign


Please add your (or some other) campaign to this sites: Guide to UMC Campaigns | Players' Review(s) | Please leave a comment here: WML filtering , WML variables
User avatar
Adamant14
Forum Regular
 
Posts: 711
Joined: April 24th, 2010, 1:14 pm

PreviousNext

Return to Scenario & Campaign Development

Who is online

Users browsing this forum: No registered users and 2 guests